Monday, May 24, 2021

What is Plastering? Importance and the Basic Process

 In a Building Plaster enhances the look and also protects the wall from moisture and other elements, it is done after completing the Masonry Work and before applying Paint.

“In Buildings, Plaster is like the Cloth for Walls”

~An Anonymous Civil Engineer

The usual Composition of Plaster is Cement, Sand and Water. It is a thin layer of mortar applied over the masonry surface and it acts as a damp-proof coat over the brick masonry work.

It is used on Masonry Walls, Ceilings and Partitions for giving them a firm look and improvising the overall look of the building.

Common Types of Plaster Used 

On the basis of raw materials Common Plater types are:

  • Cement plaster

  • Lime plaster

  • Gypsum plaster

  • Mud plaster

General Information

  • Average Plaster thickness varies from 10-15 mm for inner plaster and 15-25 mm for outer plaster

  • Brief Process, Cleaning of Surface Before Applying---- Applying Water----Preliminary coat of cement Slurry (Cement +Water) to fill up the voids in masonry----First Coat of 6-8 mm Applied---- 2nd Coat Applied

.Preparation Before Plastering

  • Any openings in the form of Electrical or Water Pipes is Closed.

  • Wire Meshes/Chicken Meshes are applied at all the junctions where cracks may arise.

  • Bull Marks for Measuring and keeping the plastering thickness uniform are given at proper intervals.

  • Walls are cured properly before plastering and made wet before plastering, cement slurry and water is also applied.

  • The mix ratio for plastering is usually 1:6, 1 part Cement for 6 Parts Sand, unless specified otherwise by the site incharge.

Instruments or Methods for Checking Plastering Process

  • Plumb Bob and Thread

  • Spirit Level

 

 

Curing of Plastering works

  • Curing Should Start immediately after 24 hours of completing the plaster.

  • The Plastered surface should be cured for minimum 7 days by spraying water, gunny bags or other materials can be used to retain the water.

  • The surface should be protected from extreme heat or frost conditions as they can result in cracks.

  • Proper Curing will help the masonry and plaster to develop the hardness and strength.


For more details, watch this: Why Curing is Important for a Building  in a Construction?


About us: Civil Center is a Civil Engineering Consultancy company which provides services ranging from Building Consultancy Services like Architectural Plan, Structural Drawing, Estimation, 3D Views of Interior and Exterior of a Building, Construction Planning and Management, and also other services like Survey Investigation Works.


We also provide industrial Training to Civil Engineering Students as well as professionals which include courses on Building Design, Detailing Estimation, 3D Modelling and Survey  by using Software like STAAD. Pro, Tekla Structural Designer, Revit Structures, Tekla Structures, MS Excel, E-Survey. In training our goal is to make our trainees ready for the industry by getting them trained in Live Projects. We also provide placement assistance to our trainees.

To join our live classes on Tekla Structural Designer and other courses related to Civil Engineering, click here : https://forms.gle/Yy9j8BH8zZzmFfZMA

For any query 

Call on: 8433248864

WhatsApp: +91 6372905201

Email: team@civilcenter.in


If you have any requirement of Building Consultancy Services like Architectural Plan, Structural Drawings etc., register using the link given below

https://forms.gle/M4MTqgcLP6ZEp4rs7

Whatsapp: +91 6372905201

Email: enquiry@civilcenter.in

Visit our Website: http://www.civilcenter.in/


Visit our Website: http://www.civilcenter.in/


You Can Find Us On Other Social Media

Follow us on Telegram :https://t.me/civilcenter17

Visit our Facebook Page: https://www.facebook.com/civilcenter/

Visit our LinkedIn Page: https://www.linkedin.com/company/civil-center

Follow our Twitter Handle: https://twitter.com/_CivilCenter

Follow us on Instagram: https://www.instagram.com/civilcenter17/


Wednesday, May 19, 2021

What is Brick & What are the types of Brick

With the Increase in Construction of Frame Structures (RCC) and Steel Structures and also the increase in use of alternative use of materials for Masonry like AAC Blocks, one might say the importance of Brick and Brick Masonry is decreasing with time but it is still one of the most used construction Material.

“Everything starts with one step, or one brick, or one word or one day”

~Jeremy Gilley

Brick Masonry is considered as Durable. The entire process consists of laying bricks with the help of Cement Mortar in a defined manner to make walls that bear the loads acting on them.

There are several types of bricks and a number of mortars which  can be used to construct brick masonry.

The bond in brick masonry, which adheres bricks together, is produced by filling joints between bricks with suitable mortar. Special cautions shall be practiced while mortar is mixed and placed since it greatly affects the performance and durability of masonry structure.

Classification of Bricks Based on Raw Materials

On the basis of raw materials bricks are of the following kinds:

1. Burnt Clay Brick: It is obtained by pressing the clay in molds and fried and dried in kilns. It is the most used brick. It requires plastering when used in construction works. 


2. Fly ash clay Brick: It is manufactured when fly ash and clay are molded in 1000 degree Celsius. It contains a high volume of calcium oxide in fly ash. That is why it is usually described as self-cementing. It usually expands when coming into contact with moisture. It is less porous than clay bricks. It has a smooth surface so it doesn’t need plastering.







3. Concrete Brick: It is made of concrete. It is the least used brick. It has low compression strength and is of low quality. These bricks are used above and below the damp proof course. These bricks can be used for facades, fences and internal brickworks because of their sound reductions and heat resistance qualities. It is also called mortar brick. It can be of different colors if the pigment is added during manufacturing. It should not be used below ground. 

4. Sand-lime Brick: Sand, fly ash and lime are mixed and molded under pressure. During wet mixing, a chemical reaction takes place to bond the mixtures. Then they are placed in the molds. The color is greyish as it offers something of an aesthetic view. It offers a smoother finish and uniform appearance than the clay bricks. As a result, it also doesn’t require plastering. It is used as a load bearing member as it is immensely strong. 

5. Firebrick: It is also known as refractory bricks. It is manufactured from a specially designed earth. After burning, it can withstand very high temperature without affecting its shape, size, and strength. It is used for the lining of chimneys and furnaces where the usual temperature is expected to be very high.

 

Classification of Bricks Based on Quality

On the basis of quality, Bricks are of the following kinds:

1.   First Class Brick:

The size is standard. The color of these bricks is uniform yellow or red. It is well burnt, has a regular texture, and a uniform shape. It doesn’t have efflorescence. It emits a metallic sound when struck by another similar brick or struck by a hammer. It is hard enough to resist any fingernail expression on the brick surface if one tries to do it with a thumbnail. It is free from pebbles, gravels or organic matter. It is generally used-

o   in a building of long durability, say 100 years

o   for building exposes to a corrosive environment;

o   for making coarse aggregate of concrete.

 

2.   Second Class Brick:

 The size is standard, the color is uniform yellow or red. It is well burnt. It has a regular shape; efflorescence is not appreciable. It emits a metallic sound when struck by another similar brick or struck by a hammer. It is hard enough to resist any fingernail expression on the brick surface if one tries to do it with a thumbnail. It is used for the construction of one-storied buildings, temporary sheds when intended durability is not more than 15 years. 

 

3.   Third Class Brick:

The shape and size are not regular. The color is soft and light red colored. It is under burnt, slightly over burnt is acceptable. It has extensive efflorescence. The texture is non-uniform. It emits a dull or blunt sound when struck by another similar brick or struck by a hammer. It leaves a fingernail expression when one tries to do it with the thumbnail.


For more details, watch this: https://youtu.be/xQ71iFU_4AI


About us: Civil Center is a Civil Engineering Consultancy company which provides services ranging from Building Consultancy Services like Architectural Plan, Structural Drawing, Estimation, 3D Views of Interior and Exterior of a Building, Construction Planning and Management, and also other services like Survey Investigation Works.


We also provide industrial Training to Civil Engineering Students as well as professionals which include courses on Building Design, Detailing Estimation, 3D Modelling and Survey  by using Software like STAAD. Pro, Tekla Structural Designer, Revit Structures, Tekla Structures, MS Excel, E-Survey. In training our goal is to make our trainees ready for the industry by getting them trained in Live Projects. We also provide placement assistance to our trainees.

To join our live classes on Tekla Structural Designer and other courses related to Civil Engineering, click here : https://forms.gle/Yy9j8BH8zZzmFfZMA

For any query 

Call on: 8433248864

WhatsApp: +91 6372905201

Email: team@civilcenter.in


If you have any requirement of Building Consultancy Services like Architectural Plan, Structural Drawings etc., register using the link given below

https://forms.gle/M4MTqgcLP6ZEp4rs7

Whatsapp: +91 6372905201

Email: enquiry@civilcenter.in

Visit our Website: http://www.civilcenter.in/


Visit our Website: http://www.civilcenter.in/


You Can Find Us On Other Social Media

Follow us on Telegram :https://t.me/civilcenter17

Visit our Facebook Page: https://www.facebook.com/civilcenter/

Visit our LinkedIn Page: https://www.linkedin.com/company/civil-center

Follow our Twitter Handle: https://twitter.com/_CivilCenter

Follow us on Instagram: https://www.instagram.com/civilcenter17/